How to install swing and sliding gates

A simple, high-quality and convenient type of gate is a swing gate. Such gates are good to install in open and large spaces, as well as in courtyards and private areas. Swing gates do not interfere with the passage of vehicles and are convenient to use.

The design of the swing gates is very simple: two doors are mounted on powerful posts, which can open both inwards and outwards. Sometimes the gate may have one leaf. Traditionally, swing gates can be latticed or sewn up. This type of gate has its own mounting features.

Features of the swing gate installation:

* Installation requires two load-bearing elements - two pillars, which must be dug into the ground to a depth not lower than the freezing of the soil (the depth varies depending on the geographical location of the region).

* The pillars must be dug in and well concreted, as they are a supporting part of the structure. Concrete needs to gain strength, therefore, according to the standard terms, it must stand for at least seven days.

* Reinforcement and concrete tape is laid at a certain depth between the pillars (the thickness of the tape is determined by specialists).

* If necessary, the inner side of the pillars is prepared for the subsequent installation of the automatic gate opening system.

* Before installation, it is important to determine which way the gate will open.

Another type of gate is a sliding gate. This is a versatile type of gate that is ideal for small areas. Sliding gates take up minimal space and, unlike swing gates, are very convenient to operate in winter. Roller supports in the structure allow you to move the gate leaf along the fence or fence, which means that in winter you do not need to clear the territory of snow. Sliding gates can be different in color and texture: smooth, corrugated, white, colored, with wooden lining, with spikes and monograms, etc.

Features of the sliding gate installation:

* As in the case of swing gates, two load-bearing pillars are first installed with a pre-designed mortgage system (this is the system that distinguishes sliding gates from swing gates).

* The pillars are dug into the ground to a depth not lower than the freezing level of the soil and concreted. Reinforcement and concrete tape is also laid.

* A foundation must be installed for sliding gates.

* Before laying the foundation, a straight and level section is prepared. The length to which the foundation is laid must be longer than the rollback of the gate. The traditional calculation formula is as follows: the distance between the entrance pillars multiplied by 1.5. https://livepositively.com/how-data-analytics-is-transforming-cs2-performance-and-igaming-strategies